Posted by Vaughn [172.68.34.175] on Saturday, June 29, 2019 at 10:05:21 :
In Reply to: Re: FFPW Hood Lacing posted by Dean [172.69.42.91] on Friday, June 28, 2019 at 22:22:27 :
Use a rivet the same size as the hole or as close to it, I used 1/8”Dx3/8”L and it doesn't require a washer on the back side. Make your hole, push the rivet through the webbing, place it in the hole, press down good on the rivet, and pop it. Punch out the remaining stem.