Posted by Tom in Indiana [172.69.90.19] on Friday, May 24, 2019 at 20:50:41 :
In Reply to: Re: Blasted clutch master cylinders!! posted by Milo in Pa [162.158.79.248] on Thursday, May 23, 2019 at 06:39:00 :
I unbolted the pushrod from the pedal and measured everything- there was over an inch of piston engagement when the pedal was at rest, so I shortened the rod, bolted everything back together, and adjusted the pushrod play to recommended specs. The result... no more leaks, at least so far. Thanks, guys!!