Posted by Paul in New Zealand [198.41.238.37] on Wednesday, May 22, 2019 at 17:36:56 :
In Reply to: Re: Clocking Question posted by Kaegi [162.158.107.40] on Saturday, May 18, 2019 at 01:41:04 :
Sorry Kaegi , yes , the arrows are aligned on all driveshafts , and yes , there is some vibration , but not sure if it’s normal or not . Everything is lined up ( and straight and new ) except , the two yokes on the input shaft of the transfer case . That’s the short shaft through the transfer case , which has a late , large U Joint yoke from the gearbox on one end , and the small front rear driveshaft universal yoke , on the other end . The two yokes are clocked about 1/2 a spline out of sync .
Greg says it shouldn’t have any effect . Clint says it will .
I wondered if anyone with a WC 53 Carryall , might have noticed a similar setup on theirs .
Anyway , thanks to all who answered . Paul .
Follow Ups: