Posted by Kevin [108.162.219.151] on Saturday, April 20, 2019 at 09:06:17 :
In Reply to: Re: Late WM300 Door Striker needed posted by Milo in Pa [172.69.62.61] on Saturday, April 20, 2019 at 08:06:30 :
Hi Milo. This was a picture sent to me from a 67 WM300. If I could find an aftermarket one I'd go that route. If you have a minute and can measure the diameter and length of your from the top to where it goes into the door I could probably find and modify one or adjust the height to work. Would appreciate it! What's strange is that on my 67, the doors have the holes but it looks like nothing was ever bolted there. The pillar has the female receiver too.
Follow Ups: