Posted by Ron on Tuesday, December 18, 2001 at 10:34PM :
In Reply to: Wooden Beds posted by Ed Kammerer on Tuesday, December 18, 2001 at 8:38PM :
Ed I used Mar-K in my 59 W-200 and it turned out great. I sanded lightly by hand with fine paper followed by a good dusting, air and tack rag. I then applied Min wax Clear Shield,sanding between 1st and 2nd coat with fine. applied a 3rd coat after using steel wool,OOOO. Make sure to coat all surfaces including end grain. Mine has been wet numerous times and still looks great. Just don't rush drying time