Posted by clueless [162.158.122.183] on Wednesday, March 13, 2019 at 12:07:06 :
In Reply to: Re: synopsis posted by Mike in Arkansas [172.69.68.120] on Tuesday, March 12, 2019 at 15:17:05 :
no expert here so take my comments with a grain of salt
i think it is more of a torque overload from the nearly 6 to 1 diff ratio and the flathead
coupled with large tires and a heavy foot
as vaughn said tho it could be as simple a loose or poorly adjusted wheel bearings as far as breakage goes
you could always just run your drive train a lil sideways to get a good working angle from tc center to offset