A couple of recommendations

Posted by wet wet west coast Bruce [162.158.106.15] on Wednesday, February 20, 2019 at 00:51:30 :

In Reply to: And here's the 4BT posted by Chris Davis [162.158.59.253] on Tuesday, February 19, 2019 at 21:04:58 :

Get rid of the side oil filler - the top works fine and the side one gets in the way.
Also replace the front and rear oil seals on the crank

AND do the killer dowel pin fix.

after that upgrade the turbo, that HC1 Holset with the 18cm exducer is a dawg.

Thanks for the tips Bruce... - Chris Davis 19:25:37 02/20/2019

Turbo - Holset HX30W - snow and sleet west coast Bruce 21:18:49 02/20/2019
- Thanks Bruce... good info! (ntxt) - Chris Davis 15:30:03 02/21/2019

Re: A couple of recommendations - Steve from WI 10:10:05 02/20/2019

Re: A couple of recommendations - wet wet west coast Bruce 10:26:44 02/20/2019

(1) Type your Message (2) Load New Code (3) Type new code into box. (4) Click "Post Message" button