Posted by Sherman in Idaho [108.162.245.13] on Saturday, October 20, 2018 at 18:03:22 :
In Reply to: High heat thread sealant posted by Jerry in Idaho [162.158.106.105] on Friday, October 19, 2018 at 17:14:26 :
I assume the handle needs to swivel or you would have already tried just a lock washer under the nut. If there's room, 2 nuts with a lockwasher in between, turned tight against each other. Or if all else fails, drill the bolt for a cotter pin and use a castellated nut (like on tie rods).