Re: PW PU Bed Wood Fitting Issues

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Dean [172.69.42.61] on Friday, September 28, 2018 at 22:28:12 :

In Reply to: Re: PW PU Bed Wood Fitting Issues posted by Clint Dixon [172.68.90.115] on Friday, September 28, 2018 at 09:52:42 :

This is a replacement frame I bought from Glenn Baldwin in ID. I don't know what it was originally used for but the frame set fairly level on the concrete when I was refinishing it.

Anyway, I cut out and shaped some rubber tread from a bias ply tire and shimmed up the front cross member 1/2 inch and the rear cross member 3/4 of an inch. The bed wood sits level front to back now.

Follow Ups:

Re: PW PU Bed Wood Fitting Issues - Jerry Henry 01:43:18 09/29/2018

Re: PW PU Bed Wood Fitting Issues - Clint Dixon 18:29:58 09/29/2018
- Re: PW PU Bed Wood Fitting Issues - Dean 00:14:01 09/30/2018

Post a Followup

Name:
E-Mail:
Subject:
Message:

Optional Link
URL:
Title:
Optional Image Link
URL:

(1) Type your Message (2) Load New Code (3) Type new code into box. (4) Click "Post Message" button