PIF and brake cylider

Posted by scott56 [172.68.189.82] on Wednesday, September 26, 2018 at 19:52:15 :

I installed new brake cylinders when I firts bought the truck over 4 years ago. Cant find the receipt and do not remember where I got them. After driving the truck a few miles on shakeout runs, the brake pedal became squishy and fluid was low in new master cylinder. I checked all the brakes and one may have been leaking. Hard to tell. I looked on the new PIF and saw 9375 for my 1948 civilian in all four locations. I removed the left front and it says 3738 and has different size bores, 1 1/4 and 1 3/8. Am I reading the PIF right. If they are all 4 the same, then the bores should be the same. I know I am starting to have more senior moments.

• first drive

Follow Ups:

• Re: PIF and brake cylider - Dave Horvath 22:02:55 09/26/2018
• Corrected - Vaughn 20:24:54 09/26/2018
  • Re: Corrected - scott56 18:45:42 09/27/2018
  • Re: Corrected - Joe Cimoch 07:27:20 09/27/2018
    • Re: Corrected - Vaughn 08:59:52 09/27/2018
    • Re: Corrected - Dean 08:02:25 09/27/2018
      • Re: Corrected - Vaughn 08:58:40 09/27/2018
    • Re: Corrected - Joe Cimoch 07:40:46 09/27/2018
      • Re: Corrected - scott56 18:44:11 09/27/2018
• Re: PIF and brake cylider - Rick 20:20:31 09/26/2018
• Re: PIF and brake cylider - Vaughn 20:03:45 09/26/2018

Post a Followup