Posted by Andrew in MI [172.68.206.43] on Sunday, August 12, 2018 at 15:30:47 :
In Reply to: thought i had brakes posted by junkyardog [162.158.63.175] on Sunday, August 12, 2018 at 14:26:31 :
I just changed the master on my truck with a new slope top style and the line fitting was always leaking at the NPT threads into the master cylinder casting.
I used this on the NPT threads:
https://www.permatex.com/products/thread-compounds/thread-sealants/permatex-high-temperature-thread-sealant/
Follow Ups: