Nope, it gets shimmed to adjust U-jt angles

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Chris Case [108.162.215.229] on Friday, July 06, 2018 at 09:17:55 :

In Reply to: Re: How to tell in X-fer case is lined up correctly? posted by Kaegi [162.158.106.189] on Friday, July 06, 2018 at 02:29:07 :

Use 1/2" fender washers, I needed 1/4" up at the front mounts.

U-joint angles have to be the same on each end of each one driveshaft. Shimming brought all three of my shafts into spec. Much quieter and smoother now.

Follow Ups:

Re: Nope, it gets shimmed to adjust U-jt angles - Kaegi 11:37:53 07/06/2018

Not cheaper than a stack of fender washers- - Chris Case 18:53:13 07/06/2018
- Re: Not cheaper than a stack of fender washers- - Kaegi 20:12:16 07/06/2018
  - Re: Not cheaper than a stack of fender washers- - Kaegi 20:47:04 07/07/2018
    - Factory doublr cardans were only on one end...... - Chris Case 08:49:25 07/08/2018
      - Re: Factory doublr cardans were only on one end...... - Kaegi 11:29:48 07/08/2018

Post a Followup

Name:
E-Mail:
Subject:
Message:

Optional Link
URL:
Title:
Optional Image Link
URL:

(1) Type your Message (2) Load New Code (3) Type new code into box. (4) Click "Post Message" button