Posted by Desoto61 [162.158.186.33] on Tuesday, April 24, 2018 at 05:34:06 :
In Reply to: Re: Door pillar cleaning posted by Matt Wilson [108.162.221.227] on Sunday, April 22, 2018 at 11:19:54 :
The Internal Frame Coating is nice stuff. I sprayed it into all the frame members on my PW. It does stick and seems to protect well.
Inside a cab it may get a little messy, I'd make sure you tape over all but the openings you spray through and the excess will run out of cracks and openings, so keep some rags nearby.
I found a place in NC that could acid dip the cab. I also had to rebuild part of the passenger A pillar at the bottom including the hinge mount. I used weld through primer everywhere I could while it was open.
To protect those areas I did use some of the frame coating, but mostly I adjusted my spray gun and tried to "fog" epoxy primer into any opening I could get the gun into when I was priming the cab.
Follow Ups: