Posted by Keith in Washington [172.68.142.164] on Monday, April 23, 2018 at 10:22:48 :
In Reply to: Re: Rear leaf spring removal posted by Ammo [162.158.74.54] on Monday, April 23, 2018 at 08:05:43 :
The grease zeros are pipe threads. Go get the right size pipe nipple screw it into the spring pin and carefully work it out. You may have to make an adaptor to get the pipe to fit your slide hammer. Remember heat is your friend. Since you got it apart plan on replacing the pins and bushings. Make sure to get the bushing in the shackle. I just put NOS bushings in as I found some cheaper than having them bushed.