Posted by Marty [108.162.241.97] on Sunday, February 18, 2018 at 16:28:21 :
Has anyone got pictures of the fuel line, brake line, wiring harness routing through the pivot?
Mine had been severely messed with. There were remnants of brake hoses & fittings attached to the cross members. I mean making it work nice & neat is easy but I'd kinda like to make it as accurate to original as possible. I'm assuming the fuel & brake would have both run flexible rubber lines likely with a loop in each end & fastened to the cross member with brass fittings adapting to inverted flare. Then I guess the original harness was likely cut & wires spliced & probably running through some kind of protective loom.
Any pics would be greatly appreciated.
Follow Ups: