Posted by clueless [162.158.122.21] on Tuesday, January 16, 2018 at 19:24:19 :
In Reply to: booster with bracket where it goes posted by clueless [162.158.122.99] on Tuesday, January 16, 2018 at 14:46:42 :
nice to have the bare chassis to mock things up on
tight fit but it clears the block by an inch
cept for the oil pan flange which it clears by 1/2 or so but the
it clears the generator and or alt oil filler spout starter and coil
basically just drops in under the battery tray which will have to be raised or the battery will have to go elsewhere but i think there is room to raise the tray
now i have to figure out the pedal push rod to ford booster push rod
have some ideas but no engineer in this area
one of the ideas is use a fixed bushing(2 in. long or so)(maybe with a grease fitting in it) i can fix to the stock mc bracket that the pedal push rod rides in and then connects to the booster push rod
Follow Ups: