Bypass port in mc?


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by DJ in WA [108.162.245.115] on Sunday, October 22, 2017 at 04:49:54 :

In Reply to: Guess not. posted by jim lee [108.162.246.236] on Sunday, October 22, 2017 at 04:31:04 :

The second figure in this article has a callout for the bypass port in the master cylinder. If my memory is correct, I have had brakes locked up when that tiny port got plugged by a bit of grit or rust:
http://www.free-ed.net/free-ed/Courses/15%20Transportation/AutoTruck03/AutoTruckShow.asp?iNum=080102

But - I think that opening a bleeder valve would have released the pressure if that were your problem in this case (?). Same with a partially blocked hose/line.

Is it possible that 1. Brakes are just adjusted a little too tight. And 2. Still need to bleed a little more air out. ?





Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


Enter the characters in the image to the left or Load New Code