Posted by Paul(in NY) [108.162.219.217] on Wednesday, September 27, 2017 at 15:04:50 :
In Reply to: Re: Steering knuckle preload setting. posted by Kaegi [108.162.245.49] on Wednesday, September 27, 2017 at 11:50:37 :
Yes, the 1/2" cap bolts must be torqued properly. You dont use the tightness of the cap bolt to adjust the rotational torque of the swinging knuckle. You must also use a bending beam torque wrench for a accurate reading. Everything must be detached from the knuckle, including the felts on the rear. Set rotational torque, then hook up everything to the knuckle.
Paul