Posted by Kaegi [108.162.245.235] on Friday, July 07, 2017 at 14:13:09 :
In Reply to: Same page. posted by jim lee [162.158.106.51] on Friday, July 07, 2017 at 14:06:23 :
is the spring attached to a cotter pin stuck through a hole in the floor board? if so that is stock. ;/)
I would still re use the stock snap rings for 3 reasons.
1. you might find new retaining wires and have them installed.
2. its the best design for service ever.
3. they are 100 times easier to remove than the other type of snap rings. they make the job much easier
Follow Ups: