Posted by Ray [162.158.69.120] on Monday, July 03, 2017 at 18:29:31 :
In Reply to: wont start posted by Jerry [108.162.216.223] on Monday, July 03, 2017 at 01:18:49 :
Jerry
Go back to basics, put your old condenser back in, check that your firing order didn't get moved one cylinder when you replaced the wires, make sure the new wires are making solid contact with the Cap and each spark plug.
Check for the points to open when cranked over before setting rotor, then that the rotor is set in its notch and is rotating when cranked.
Check that the Carbon in center of cap is making contact with rotor, and rotor is making contact with each brass post on cap, and that there is no scratching inside the cap due to previous misalignment, is the cap in the notch, and locked down.
Good Luck, change one thing at a time so you know what fixed the problem.
Follow Ups: