Posted by paul in new zealand [198.41.238.7] on Wednesday, June 28, 2017 at 20:37:15 :
In Reply to: Need Help: Dodge Carryall wiper motor posted by WarEagle [108.162.237.181] on Wednesday, June 28, 2017 at 16:11:48 :
Assuming the wipers are American BOSCH , 6 or 12 volt .As per " Installation Instructions", revised August 1969 : Connect a standard # 14 B&S gauge insulated cable from the insulated terminal of the wiper motor, to one side of the switch terminal . Connect a cable from the remaining switch terminal, to the ammeter or fuse block .
If the wiper mounting does not provide a good ground connection , a separate cable should be run from the ground terminal of the wiper , to a suitable ground common to the battery ground .