Posted by Vaughn [172.68.141.253] on Tuesday, June 27, 2017 at 23:12:24 :
In Reply to: Re: Speedometer Correction? posted by CSCameron [172.68.141.43] on Monday, June 26, 2017 at 21:20:25 :
Forgot to mention, you'll use the 14 tooth pinion gear, so make sure you have that one. Bad thing is you'll need to disassemble the TC driven gear to replace it which might require an adjustment to the bearings. Plus side no plastic gears to go bad. You might want to consider changing the pinion gear and housing to an M37 pinion and housing, it gets the cable higher for easy access. I've posted a picture in the temp section at the bottom on my site. You'll use the 5 tooth, not the 4 tooth supplied in the kit.
Follow Ups: