Posted by Dozerman51 [162.158.255.19] on Tuesday, June 13, 2017 at 13:41:53 :
In Reply to: Re: Better now.. posted by Milo in Pa [162.158.78.19] on Monday, June 12, 2017 at 19:41:27 :
If you want to use the 90WT gear oil it calls for and have no leaks, you will have to take the steering gear apart and replace the housing bracket gasket and the shaft oil sea. The housing bracket gasket(cork) can be made by using the circular end of the CC#916083 wheel bearing nut wrench. It's OD is the same as the indent in the gear housing where it it installed. I would also apply Permatex #2 on the housing bracket where it mates to the steering gear housing. To seal the shaft end you use a metric seal and it works perfect. I did this to my WC 1/2 ton steering gear and I have absolutely no leaks anywhere.