Posted by Chris Case [173.245.48.192] on Sunday, April 23, 2017 at 09:44:59 :
In Reply to: Externally Balanced Crank posted by Dave Horvath [162.158.79.248] on Saturday, April 22, 2017 at 17:53:46 :
See the flats on each side of the weight?
First, I would check that the components are clocked correctly, Use the little poer over #6 to set the crank to TDC, and see the the timing marks line up. If not, swap it out. No point in usung a baLancer that is off balance.
But niw,m the real question, is the crank any diffferent> What have that on that when other don't...
Follow Ups: