Posted by Mike McClintock on Monday, November 05, 2001 at 4:21PM :
In Reply to: Zerk posted by fletch on Monday, November 05, 2001 at 10:27AM :
There should be a plug on the bottom and a zerk on the top.
On a warm day, or after driving for awhile with the front drive axles spinning (this doesn't work with cold grease in the knuckle), remove the bottom plug, and apply grease to the top fitting until it comes out the bottom. Replace plug.
MM
|
This board is powered by the Mr. Fong Device from Cyberarmy.com |