Posted by Keith in Washington [108.162.246.8] on Monday, January 16, 2017 at 16:09:58 :
In Reply to: OT: aluminum wheel-steel hub posted by Gary in CO [173.245.50.201] on Monday, January 16, 2017 at 15:00:39 :
I consider putting some anti seize on the mating surface.
I learned about anti seize from a guy who ran logging tools in oil and gas wells. The tools are exposed to high temperatures and very corrosive fluids at times. If they did not use anti seize on the threads that connected the tools together they often had to fight for a long time to separate them once they pulled them from the well. They had no problems taking the tools apart if they used anti seize.