Posted by clueless [108.162.210.234] on Wednesday, November 30, 2016 at 15:19:31 :
In Reply to: Re: notice i put an aluminum sleeve on the od end of posted by Kaegi [108.162.246.78] on Wednesday, November 30, 2016 at 14:55:19 :
cut the tube shorter
is it a check valve or proportioning valve
on mine the fitting is there but no valve cuz tis for front and rear disc--so if you the 1 1/4(which is app. for front disc and rear drum) just remove the white thingamajigy off the back of the fitting and then there is no valve
as i said mine came without the plastic valve
on the back of the brass
Follow Ups: