Posted by Terry [199.27.133.57] on Tuesday, November 22, 2016 at 11:32:23 :
In Reply to: 7/16 studs with 3/8 nuts were standard? posted by Chris Case [173.245.48.207] on Tuesday, November 22, 2016 at 08:21:59 :
First off, sorry for the mis spells, fingers faster than computer.
After a closer look in better light, the studs on one side are 3/8" with a 5/16" nut, the size I am familiar, with an axle stud bore of 3/8". The studs in question are 3/8" with a 3/8" nut. I guess somebody replaced the studs at some time in retrospect, I have just never had the need to pull a stud bolt out of a hub to notice the difference.