Posted by Glen of Idaho [108.162.246.76] on Sunday, October 30, 2016 at 13:44:20 :
In Reply to: Glenn of Idaho posted by WarEagle [108.162.238.70] on Saturday, October 29, 2016 at 09:06:07 :
Thanks, this is where I am now. I edge glued all of the narrow srips of white oak then cut the assembled floor into three pieces leaving a 1/4" gap under the steel runners. All of the edges and fixtures are rabbeted in with a plunge router bit. I made oversized patterns to guide the router.Sort of a fun project for a welder fabricator, haven't used much wood other than log house building.
Follow Ups: