Posted by Kevin in Ohio [172.68.59.169] on Friday, October 28, 2016 at 07:34:29 :
In Reply to: Another signal stat 900 issue posted by Mark in WV [108.162.238.74] on Thursday, October 27, 2016 at 16:17:28 :
Have you tried disconnecting each light, then hooking back up to see if anything changes? That would rule out one light being a ground issue.
The only issue i ran into was that I used some LEDS and I didn't have enough electrical draw for the flasher to cycle. Had to add some more and everything was fine.
Follow Ups: