Posted by Don in Missouri [172.68.58.155] on Friday, October 21, 2016 at 12:19:20 :
In Reply to: Re: clutch in hand posted by cluesless [108.162.210.234] on Friday, October 21, 2016 at 11:45:19 :
That clutch fits the Clark.
I am using the eight cylinder flywheel in a Power Wagon flywheel housing, and a 11" pressure plate from a 2-ton truck.
I'd include this clutch if someone wanted to buy the transmission, but you may want a 10" disc to fit your Power Wagon pressure plate and flywheel.
The pilot bushing I would need for my straight eight flywheel would have a 1" OD and .586" ID. I'm guessing the six cylinder also has a 1" pilot hole in the crank, but I didn't measure that.
Follow Ups: