Posted by Greg Coffin [172.68.34.169] on Monday, September 26, 2016 at 00:38:03 :
In Reply to: Re: Two steps forward, one step backward... posted by CSCameron [173.245.48.199] on Monday, September 26, 2016 at 00:14:01 :
Weld 2 or 3 nuts to the face of the seal, then run a heavy bead all the way around the face of the seal. The weld will shrink and pull the outer lip of the seal away from casting. Sometimes they pretty much fall out after welding the face. Good luck!