Posted by daveyk [108.162.246.17] on Monday, August 08, 2016 at 09:05:44 :
In Reply to: can't measure length of installed crank posted by wayneh [173.245.54.57] on Monday, August 08, 2016 at 08:33:27 :
Hello Wayne,
Can you measure the distance from the back of the block to the flywheel flange on the crank and then measure the old crank?
The wear mark from the rear main seal on the old crank and then compare to the installed crank should get you close.
If you still have the old block the measuring will be easy.
HTH
dave