Posted by Dan (NH) [108.162.219.144] on Thursday, August 04, 2016 at 08:40:13 :
In Reply to: and one more thing posted by wayneh [173.245.56.71] on Thursday, August 04, 2016 at 08:33:08 :
If the old crank was 1/4 of an inch it would make a difference. The clutch pivot is off the bell housing which is a specific distance from the flywheel face.
Look for significant differences in thickness of the flywheels width of throw out bearings etc.
Did you use the same bell housing and transmission as well?
Follow Ups: