Posted by Daryl in Oz [162.158.3.173] on Monday, July 25, 2016 at 07:59:22 :
In Reply to: Re: Is this it? posted by Sherman in Idaho [108.162.245.23] on Sunday, July 24, 2016 at 21:24:24 :
Mine was only about 3/4" thick and the stud spacing on one side fit the engine mount, while the other side was narrower, so I filed the holes in the cross-member about 1/8" closer together. Don't remember what it was from, but it was a more common part.