Posted by Clint Dixon [162.158.214.16] on Tuesday, June 28, 2016 at 19:04:51 :
In Reply to: PTO adapter plate posted by Mark in WV [108.162.236.43] on Tuesday, June 28, 2016 at 17:10:43 :
I ran an after type PTO on an up-to type transmission for years with a 1/4" thick spacer to allow for correct tooth contact. There is room as the housing on the after type is 1/4" shorter, the gear sticks out 1/4" further, and with the spacer, the housing is right up against the pedal pivot as if you were using the correct PTO.
Junior
Follow Ups: