Posted by Keith in Washington [108.162.246.30] on Tuesday, June 28, 2016 at 15:54:37 :
In Reply to: Re: 1941 Dodge ½ Ton WC-10 Carryall $18,500 [CA] posted by w200tim [199.27.128.183] on Tuesday, June 28, 2016 at 13:58:54 :
I assume you are talking about a 1941 1/2 ton. If so, you need to shorten one drive shaft. I believe the rear one as the two speed is thicker. You also need to replace the transfer case mounts to fit the 2 speed transfer case. It is best to use mounts from a WC 62 or 63 as the bolt holes will match those in the cross member. If you use transfer case mounts from a PW, the transfer case mounting holes are different in the PW and will require you to drill new holes in the cross member. The above is also true on swapping a 2 speed transfer into a 3/4 ton WC.