Posted by dc [108.162.244.133] on Sunday, June 12, 2016 at 13:52:35 :
In Reply to: Re: Tranny Update... posted by CSCameron [108.162.215.203] on Sunday, June 12, 2016 at 10:19:31 :
might be a bad pto drive gear ,I would pull the trans do the work on the bench ,set the pto to 0.08 back lash pull pto back off
put gear-marking compound on all the pto teeth reinstall and see what the contact look like , also measure 3" on both pto & trans gears make sure the both have the same teeth count too .