Posted by wayneh [173.245.54.42] on Wednesday, May 11, 2016 at 21:31:06 :
In Reply to: Tools? posted by CSCameron [162.158.57.65] on Wednesday, May 11, 2016 at 19:36:53 :
Clark: You need a spanner wrench to get the spanner nut off the input shaft. EBAY or Amazon has it. If you want to pull the reverse idler gear you need to make something up to pull that shaft. It will not push all the way into the transmission case so don't do that! I think you also need a split bearing puller.
Wayne
Follow Ups: