Posted by Dave Horvath on Thursday, October 04, 2001 at 12:04PM :
In Reply to: Re: Wood bed question... posted by Dana on Wednesday, October 03, 2001 at 11:57PM :
Dana, the random width boards were only secured by the skid strips on one side and the front bed panel at the end. There was no plank underneath, just the frame cross members to which the strips are secured. As I recall, there were no more than two boards spanning the distance between any two strips. A woodworking tip is to have the crown in the growth rings of every other board face opposite directions, so they are less likely to warp in the same direction. Good Luck!
|
Follow Ups:
This board is powered by the Mr. Fong Device from Cyberarmy.com |