Posted by Ken See on Monday, October 01, 2001 at 10:13AM :
In Reply to: Axle ratio confirmation posted by Matt B on Monday, October 01, 2001 at 9:37AM :
Under the carrier there is a flat spot in the casting with the ratio stamped on it. It will need a scraper and wire brush to read it, and even then you'll have to study it. Chances are it's 5.83 unless it was changed sometime in the last 50 years. Everything else should work just fine.
|
This board is powered by the Mr. Fong Device from Cyberarmy.com |