Posted by Andrew Walak [173.245.52.108] on Monday, March 21, 2016 at 07:51:44 :
Good Morning Everyone!
Yesterday I took my 62 WM300 out for a test run. After driving down the road for 3 minutes or so I started to lose power and it started bucking.
It gets to the point where it will almost stalls out. The only thing that stops it from stalling is when I push in the clutch.
I checked the distributor cap, no cracks, but one of the clips that holds the cap on was rusted and loose. This could have caused a loose distributor cap, but it appeared tight. I ordered new clips.
Does anyone have any thoughts on what else this might be?
Thanks for the help!
Follow Ups: