Posted by Willy-N [108.162.216.23] on Saturday, January 02, 2016 at 16:26:25 :
In Reply to: Re: Winch yoke posted by scott 56 [162.158.255.5] on Saturday, January 02, 2016 at 15:55:46 :
I bet the shear pin is part way sheared in the hole or bent a little stopping it from coming out. If so you need to drill the ends out and remove the yoke and drill or punch out the rest of the pin. Not a hard project to do with a variable speed drill motor and sharp bits.