Posted by Jerry in Idaho [108.162.221.14] on Saturday, January 02, 2016 at 16:10:24 :
In Reply to: Re: Does shear pin extend outside? By the way a Zerk in yoke posted by scott 56 [162.158.255.5] on Saturday, January 02, 2016 at 15:53:42 :
Maybe you can weld a slightly smaller bolt to the ends of the shear min and pull them out from either side.
Most likely what has happened is the pin sheared (that's it's goal in life) and you don't have any way of telling when the holes in the yoke are lined up with the remaining portion of the shear pin. You need to get at least one side out so you can see where to place your drift punch to drive it through the shaft.