Posted by Marsh [174.60.191.190] on Tuesday, December 22, 2015 at 20:56:51 :
In Reply to: Re: 318 Pilot Bushing Removal posted by Kevin in Ohio [104.240.186.66] on Tuesday, December 22, 2015 at 19:40:43 :
Looked around the shop and found some round stock that best fit. There was some amount of grease seeping out around the punch as I pounded. Bushing is flush with the crank end (not driven in) As you mentioned, too much grease bypassing the punch. I'll try again tomorrow.
Thanks Kevin
Follow Ups: