Posted by bubba on Wednesday, September 26, 2001 at 6:28PM :
In Reply to: PW axel ratio posted by Darryl Weaver on Wednesday, September 26, 2001 at 2:31PM :
you could always pull the cover off the diff. and simply read the ratio markings on the gears. I do this when I get a "new" truck to make sure that the front and rear are the same. At this time I also check to see if the pins have worked thier way out.
|
Follow Ups:
This board is powered by the Mr. Fong Device from Cyberarmy.com |