Re: Here Goes Nothing Decided to do it

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Willy-N [72.168.161.127] on Sunday, November 29, 2015 at 23:58:38 :

In Reply to: Power Assist Brake Conversion posted by Willy-N [72.168.161.127] on Sunday, November 29, 2015 at 15:08:40 :

Looked at over 1,000 listings read up a bit saved some money price wise and decided to take on the project. Ordered a unit and going to try to install it on the 6X6. Nice part is my origin brakes will work most of the time setting it up in the truck. When I pull the old master cylinder I will only need to hook up the rods and brake lines to it. Not much down time on this project.

Follow Ups:

you don t need 2 rods - clueless 13:38:18 11/30/2015

Re: you don t need 2 rods - clueless 13:54:21 11/30/2015
- Re: Take a close look at picture - Willy-N 14:19:00 11/30/2015
  - pic - ed 15:25:37 11/30/2015
    - better pic - ed 15:48:23 11/30/2015
      - oops try again - ed 15:50:14 11/30/2015
    - it can all move closer to the frame - ed 15:28:57 11/30/2015
      - Re: it can all move closer to the frame - Willy-N 16:47:51 11/30/2015
        
        Re: it can all move closer to the frame - clueless 16:58:33 11/30/2015

Re: Here Goes Nothing Decided to do it - bobyepsr 10:43:16 11/30/2015

Re: Here Goes Nothing Decided to do it - Willy-N 12:09:22 11/30/2015

Post a Followup

Name:
E-Mail:
Subject:
Message:

Optional Link
URL:
Title:
Optional Image Link
URL:

This board is powered by the Mr. Fong Device from Cyberarmy.com