Posted by Jerry in Idaho [24.49.176.137] on Wednesday, November 11, 2015 at 16:31:57 :
In Reply to: Re: 1964 W300 on ebay posted by Clint Dixon [50.82.216.254] on Wednesday, November 11, 2015 at 13:10:36 :
There is approx. 5" difference between the measurements (brake drum surface to brake drum surface) on the front and rear from '68 back. I had mine made out of 3/8" plate and 3/8" tube, welded on a lathe, and holes drilled so that the adapter could be bolted to the existing studs on the axle and not interfere with the new wheel studs. I had no desire to run on duals on ice. :)
Follow Ups: