Posted by Tim Holloway [69.54.28.229] on Thursday, November 05, 2015 at 18:09:12 :
In Reply to: Re: Usage? posted by Jerry in Idaho [24.49.176.137] on Thursday, November 05, 2015 at 17:41:13 :
Hi Jerry,
I "welded" a crack in the bottom of a poly kayak this summer using a heat gun and a putty knife. I found a bunch of stuff on Youtube. Basically you cut a strip of plastic from somewhere inconspicuous, hard on a gas can, but maybe off another dead can, and heat the plastic until it gets shiny and wet looking and then start working the "rod" from the other can into the crack. Smooth it over with a flexible putty knife and it will be almost invusible.
Tim
Follow Ups: