Posted by Tim Holloway [69.54.28.229] on Wednesday, November 04, 2015 at 15:29:58 :
In Reply to: Pull dist, jumper hot and ground, spin by hand? posted by Chris Case [108.247.147.90] on Wednesday, November 04, 2015 at 10:04:37 :
Hi Chris,
Now that is interesting. I know that the pump is spinning as we bumped the enginr over to get the distributor tang to drop in.
However, I have noticed that my (electric) oil pressure gauge does not show me building much oil pressure when cranking it over attempting to start.
No steam cleaning and was careful with my cleaning residue.
Thanks,
Tim